Hello, I am in the process of tuning my newly built Prusa i3 and I have some issue finding the right parameters to tweak in order to fix some issues with the infill of my first layers. I am using Repetier firmware/host and Slic3r 0.9.10b. The basic calibration seams quite ok and I am getting very u
5. Final adjustments and calibration - Bear Lab
Under extrusion (?) during first layer infill. 215 print temp (default for prusament in prusaslicer) I've tried a cold pull and there's nothing clogging the nozzle. I can feel a very slight
Prusa mk3 bed level / first layer test file by Punkgeek
prusa i3 - First layer looks weird and print fails - 3D Printing
PRUSA LIVE #52 - Load cell first layer calibration and firmware
First Layer Frustrations – Assembly and first prints
For some reason i have to redo the first layer calibration for every print. This is the same height that worked flawlessly in the previous print, a few minutes prior. Anyone know
I dont get it, Z calibration works great, print fails – Assembly
5. Final adjustments and calibration - Bear Lab
print quality - Z-axis Calibration Fault in Prusa i3 MK3S - 3D
cdn./assets/4e/eb/7f/35/a9/card_pre
First Layer Calibration (i3)
Prusa i3 MK3S+ first layer issues : r/3Dprinting
Prusa I3 mk3 - Not your average inconsistent first layer - 3D
First Layer Calibration Prusa i3 MK3/s/+ by ArtyL