Flat lock panel

Flat lock panel

4.9
(294)
Write Review
More
$ 5.00
Add to Cart
In stock
Description

lt;p>VMZINC Flat Lock panels, sometimes known as shingles, are installed on a continuous vented substrate on both renovation projects and new build alike. The system consists of panels with 180 degree hems approximately 25mm wide that interlock and are held on the substrate using cleats. The system allows a great deal of flexibility as flat lock panels can be made to many shapes and sizes. The panels can be square, diamond shaped and rectangular.</p> <h2>Structure</h2> <p>The system is very lightweight as the panels weigh no more than 8 kg/m2 and can be fixed back to both soft wood open gap boarding and plywood. Both substrates require the use of continuous 18mm thick wood and a vented airspace should be left behind the timber of at least 38mm. VMZINC PLUS must be used on plywood substrates. For vertical surfaces VMZINC can be used on vented plywood with VMZINC Membrane.&nbsp;</p> <p>For projects where combustible materials such as plywood cannot be used galvanised a 0.7mm galvanised steel deck can be used as a substrate.&nbsp; By combining this with mineral board insulation, all materials in the wall build up are A1 or A2 according to EN 13501. The steel deck must be at least 0.7mm thick and have dimensions allowing clips to be attached at the required spacings. Corrugated steel deck can only be used on vertical surfaces. For all surfaces such as sills, parapets, etc the substrate must be continuous. The 38mm vented cavity can be fire stopped using continuous vertical cavity barriers and intumescent horizontal cavity barriers.</p> <h2>Drawings</h2> <p>Please find below files containing a selection of drawings. Further drawings are available upon request from your specification manager. Please note these drawings are only relevant for Ireland and UK market.</p>

Flat Lock Pure + FreeForm

Flat Lock Wall Panels - Straightline Sheet Metal

Flat Lock - NFM Roofing & Cladding

Flat Lock Metal Wall Panels - Flat Lock Metal Roofing

Flat Lock Metal Wall Panels - Flat Lock Metal Roofing

Flat-lock Panels – Roofing Group Pty Ltd

Flat Lock Metal Wall Panels, Flat Lock Zinc Panels

Flat Lock Panels – Agway

Flat Lock Roof & Wall Panels. Copper, Steel, Aluminum, Zinc

Architectural Details: Wall Cladding - Diagonal Flat Lock Systems

Copper Flat Lock Panel - Apollo Bay - Architectural Panel Systems

Flat Lock panel VMZINC North America

Flat Lock Roof & Wall Panels. Copper, Steel, Aluminum, Zinc