D2 - Desiccant Compressed Air Dryer

The D Series is a single tower desiccant air dryer designed for point-of-use applications.  The rust-free powder coated aluminum housing is made in Canada and includes built-in brackets.
DESCRIPTION The D Series is a single tower desiccant air dryer designed for point-of-use and intermittent flow applications.   The wet compressed air enters at the inlet, is first separated due to the off-set inlet creating centrifugal separation to trap water droplets, and subsequently passes around a polypropylene coalescer element, felt pads, and stainless-steel grids to remove solid particulates.  The air flows upward through a sewed filtration desiccant bag that acts as a sponge to absorb moisture.  Finally, the air flows again through the second filtration stage to eliminate any desiccant dust.  This 3-stage system efficiently provides separation, filtration, and drying. It is time to replace the cartridge when the Moisture Gauge indicates saturation.  The replacement is fast and mess-free, thanks to the US stainless-steel clamp.  The rust-free powder-coated aluminum housing is made in Canada and includes built-in brackets.  A superior alternative to Devilbiss DAD 500, Camair CT30, MP Filenco, Van Air Moisture Block. SPECS INLET / OUTLET PORTS: 1-1/2'' NPT AIRFLOW @ 100 PSIG: 150 SCFM MAXIMUM INLET PRESSURE: 150 PSI MAXIMUM INLET TEMPERATURE: 100°F (38°C) CRN: CERTIFICATIONS & PRESSURE RATINGS PRE-FILLED WITH DESICCANT CARTRIDGE PRESSURE GAUGES, SAFETY VALVE, AND BALL VALVE INCL. UNIT WEIGHT: 50 LB BOX DIMENSIONS: 22 x 12 x 9 PDF PDF    FAQ 1. How long does the cartridge last?Typically we recommend changing the cartridge at least once to twice every year (or every 2,000 hrs) when used for point-of-use applications with an intermittent flow.2. When do I know when to change the cartridge?Use our moisture indicator HGT-1/4 and replace the cartridge when the R.H. exceeds 80%.3. Can I regenerate the desiccant?We highly recommend replacing the desiccant with a fresh cartridge for optimal performance.  However, you may dry the desiccant by emptying the bag and leaving the activated alumina in an oven at 275 F for 4 hours (approximately).  Let the desiccant cool down before refilling the bag.  Use a commercial stapler to close the bag. 4. How can I extend the life of the cartridge?We recommend draining the tower daily by opening the ball valve or using our automatic timer drain TD-1/4.  When there are bulk liquids in the compressed air, a water separator FSD Series installed upstream of the dryer will knock water and prevent the flooding of the cartridge. 5. Can I oversize my air dryer?Yes, oversizing the air dryer will increase the time in between maintenance.

Brett Hrbachek on LinkedIn: Desiccant Air Dryers

D2 - Desiccant Compressed Air Dryer

Desiccant Compressed Air Dryers

We’re getting really sophisticated here, bros. My good friend Scott Ales owner and founder of YoungTimer (an automotive restoration service), has

Nano D2 Series Desiccant Air Dryer

DESCRIPTION, The D Series is a single tower desiccant air dryer designed for point-of-use and intermittent flow applications. The wet compressed air

D2 - Desiccant Air Dryer

Desiccant Air Dryer Toronto or Guelph - Compressed Air International

Super-Dry D2 - Desiccant Air Dryer - up to 150 CFM — Compressed Air Advisors Online, Inc.

Basevac Standard Oil-less Dental Air Compressor D2.5 - 220 2880112

Desiccant Air Dryer Toronto or Guelph - Compressed Air International

D4 Compact High Pressure Desiccant Dryers

Desiccant Air Dryer - D Series

Regenerative Desiccant Dryers in Edmonton

Super-Dry D2 - Desiccant Air Dryer - up to 150 CFM — Compressed Air Advisors Online, Inc.

Description PRODUCT DETAILS **A general rule for compressor output is 3-5 SCFM per HP. Check in your compressor manual, or with the manufacturer** The

D2 COMPRESSED AIR DRYER - 7 SCFM - 1/2 CONNECTIONS

Super-Dry D2 - Desiccant Air Dryer - up to 150 CFM — Compressed Air Advisors Online, Inc.